Sendo Standart

Sendo Standartis a classic manual blood pressure monitor with stethoscope.

• Clearer sound (special high-conductivity stethoscope membrane);
• Dust and particulate filter;
• Measuring blood pressure with a stethoscope is a simpler and more economical solution;
• The device is easy to use and highly reliable;
• The cuff does not cause allergic reactions.

1. When measuring the blood pressure, the cuff is placed on the left arm, 1-2 cm above the elbow and held in a sitting position.
2. Place the stethoscope gauge under the bandage, under the tubes connected to the apparatus, and at the ends of the stethoscope in the ear.
3. Close the air circulation valve on the inflatable meter by turning the screw clockwise.
4. Inflate the valve by pressing it with your right hand and your pulse begins to be heard on the stethoscope in the ear.
5. Do not inflate the valve until the meter reads about 3 points (mm Hg) above the expected systolic voltage. At this point, your pulse should not be heard on the stethoscope. Check the gauge and slowly release the pressure in the valve by unscrewing the air circulation screw counterclockwise.
6. Listen carefully for the first beat of the pulse. Once heard, it is read on the meter. This reading is your systolic blood pressure ( highest level ).
7. Slowly turn the screws on the valve again. It is listened to carefully until the pulse disappears and is no longer heard. When the pulse is not heard, it is read on the meter and this reading is your diastolic pressure ( lowest level ).